Chemical Process Pump :
Materials of Construction
"SMS" Series Centrifugal Process Pumps
"SMS" Series FPE-F pumps are "Centrifugal Process Pumps" in Back Pull-out Construction , Horizontal, Foot Mounted, Single stage, End suction and Top Centerline Discharge, confirming to DIN 24256 / ISO 2858, standards and in general confirming to API 610 as well.
SMS make FPE-F series Horizontal Chemical Process Pumps are Single Stage, End Suction, highly efficient & most reliable. They are the Back Pull Out construction Foot Mounted with top centre line discharge. Due to higher efficiency & highest reliability the overall operating cost of the process is being minimized. They are available in wide range of discharge & heads with pressure sustaining capacity of up to 40 bar confirming to DIN - 24256 / ISO 2858 standards & in general confirming to API - 610 as well
They are available in various material of construction like CAST IRON, CAST STEEL, STAINLESS STEEL, ALOY 20, cd 4 Mcu Nickle & Nickle based alloys, Ni-Resist, GUN METAL, BRONZE etc to suit the prosess liquid to be pumped Also only contact parts in special MOC or complete pump in special MOC for corrosive atmosphere
- CHEMICALS, DYES & INTERMEDIATES
- OIL EXTRACTION & WASTE OIL REFINERIES
- BULK DRUGS & PHARMACEUTICALS
- EFFLUENT TREATMENT PLANTS
- HEATING & AIR CONDITIONING PLANTS
- COOLING TOWERS
- ORGANIC/INORGANIC CHEMICALS
- HYDROCARBONS / VOLATILE LIQUIDS
- DYES & INTERMEDIATES
- WATER TREATMENT & DISTRIBUTION SYSTEM
- THERMIC FLUID / HOT OIL
- CORROSIVE / ABBRASIVE LIQUIDS
- Centrifugal Process Pumps Offered with closed or Semi Open impeller.
- Impellers are provided either with Back Vane or Back Wear Ring to minimize Axial Thrust and Gland Leakage.
- Flange Rating PN 16 to PN 64 and drilled to DIN standard to meet ISO 2858 requirements.
- Flange Rating to BS / ASA Standards also offered.
- Various Shaft Sealing Available are :
- Gland Packing ( ASB. / NON ASB. depending on the service.)
- Moulded Graphite Rings.( GRAFOIL PACKING )
- Mechanical Seals (Single or Double Mechanical Seal Arrangements.)
- Jacketing for heating/cooling offered for Casing, S/Box, Casing Pedestal and Bearing- Housing.
- Standard Bearing / Special Heavy Duty Bearing arrangements available.
Materials of Construction
- AS PER ASTM / DIN STANDARDS
- GRADED GREY CAST IRON
- CARBON STEEL(WCB) / ALLOY STEEL
- CF8, CF8M, CF3, CF3M (SS316L), ALLOY 20, CD4MCu
- NICKEL & Ni-ALLOYS, NI-RESIST, 2% NiCI, R 55, HASTELLOY -B / C
- GUN METAL / BRONZE
- Capacity : 400 M³/hr.
- TDH UP TO: 140 MLC
- Speed - n -: 960 / 1450 / 2900 rpm
- Temperature :-10 ºC to +250 ºC
- Working Pressure : 40 Bars
- Pump sizes - DN - : 32 mm to 200 mm