Thermic Fluid Pump :

  • General

  • Applications

  • Construction Options

  • Materials of Construction

  • Operating Range

"SMS" Series Thermic Fluid Pumps/ Hot Oil Pumps

"SMS" Series FPE-TC pumps are Centrifugal Pumps in Back Pull-out Construction , Horizontal, Center line Mounted, Single stage, End suction and Top Centerline Discharge Suitable for Thermic Fluid & Hot Oil also.

SMS make FPE-TC series Hot oil pump are single stage, end suction, top center line discharge, centrally mounted, horizontal centrifugal pumps. They are highly efficient & rigid construction & most reliable in back pull out construction Due to all the above features they reduce the pumping cost They are most suitable for pumping corrosive & non corrosive hot liquid up to the temp of 350 deg C They are available in wide range of heads & discharges. They are supplied with water cooled bearing housing, jacketed stuffing box for the cooling of stuffing box & water cooled pads under casing for the cooling of casing. Due to centrally mounted expansion of casing due to high temp of liquid being pumped is reduced to half upwards & downwards to avoid undue stresses on casing & delivery piping

INDUSTRIES

  1. CHEMICALS, DYES & INTERMEDIATES
  2. OIL EXTRACTION & WASTE OIL REFINERIES
  3. BULK DRUGS & PHARMACEUTICALS
  4. THERMIC FLUID HEATING SYSTEMS

SERVICES

  1. THERMIC FLUID / HOT OIL

Construction Options

  1. Offered with Closed Impeller.
  2. Impellers are provided either with Back Vane to minimize Axial Thrust and Gland Leakage.
  3. Flange Rating PN 16 and drilled to DIN standard to meet ISO 2858 requirements.
  4. Shaft Sealing by, Moulded Graphite Rings.( GRAFOIL PACKING )
  5. Mechanical Seals ( SINGLE SPRING / METALLIC BELLOW).
  6. Jacketing for Cooling offered for S/Box, Casing Pedestal and Bearing- Housing.
  7. Standard Bearing / Special Heavy Duty Bearing arrangements available.

Materials of Construction

  1. AS PER ASTM / DIN STANDARDS
  2. CARBON STEEL(WCB) / ALLOY STEEL
  3. CF8, CF8M, CF3, CF3M (SS316L), ALLOY 20, CD4MCu

PERFORMANCE RANGE

  1. Capacity : 250 M³/hr.
  2. TDH UP TO: 95 MLC
  3. Speed - n -: 960 / 1450 / 2900 rpm
  4. Temperature : 350 ºC
  5. Working Pressure : 15 Bars
  6. Pump sizes - DN - : 32 mm to 100 mm

MATERIAL OF CONSTRUCTIONS

  1. AS PER ASTM / DIN STANDARDS
  2. GRADED GREY CAST IRON
  3. CARBON STEEL(WCB) / ALLOY STEEL
  4. CF8, CF8M, CF3, CF3M (SS316L), ALLOY 20, CD4MCu
  5. NICKEL & NICKEL ALLOYS, NI-RESIST, 2% NiCI, R 55, HASTELLOY -- B / C
  6. GUN METAL / BRONZE

SMS PUMPS & ENGINEERS
195, PUSHPAK INDUSTRIAL ESTATE, ( OLD NIKA TUBE COMPOUND ) PHASE-I, GIDC, VATVA AHMEDABAD-382445 (Gujarat-India )
Phone : +91 (079) 25851160
Mobile : +91-9825066273
Email : response@pumpindia.co.in

Html 5 icon Designed by GID Designed by MIPL